Showing 1–22 of 48 results

NO-002 Series Portlight
NO-002 Series Portlight
NO-002 Series Portlight

Bomar Flush Mount Portlight

Short Description available soon.

Read more
Attractive and durable, our console doors will be a dependable feature on your boat.
Console Door
Console Door

Our MP series console doors provide benefits for both the boat-builder and user. Attractive and durable, our console doors will be a dependable feature on your boat. The clamp-in mounting design provides a fast and secure installation without the need for exterior fasteners or holes drilled though the hull. This provides a sleek exterior look and an interior look that requires no additional finish trim. The MP series console doors can be readily fit to match your size and finish requirements.

Durability:

With no holes on the exterior frame, these doors are made to last significantly longer than other frames in its class against failure. Our all-aluminum frame design keeps this unit from deforming or warping while the large gasket helps to support the door against leakage in rough conditions.

Installation:

Installation is done within minutes.

  1. Cut a hole out from the surface for the door.
  2. Add sealant around to the frame as it will touch attach to the mounting surface.
  3. Install the interior trim ring with screws determined by trim ring fastener guide.

View more Bomar products.

Read more
Rod Holders
Rod Holders
Rod Holders

Stainless Steel Rod Holders
Polished stainless steel body with a tapered smooth closed or open bottom, soft PVC liner.
Closed end rod holders have a drain for 1/4″ pipe fitting.

Bolt-less Rod Holder 2″ body only.

Read more
Decorus Series
Decorus Series
Decorus Series

“Where classical meets contemporary”!
The Decorus stylish upholstery and decorative teak accents combine to create
a beautiful masterpiece with unparalleled comfort.

This chair is sure to be the focal point of every vessel!

Read more
1700 & 1800 Series Hatch
1700 & 1800 Series Hatch
1700 & 1800 Series Hatch

Bomar SS Voyager Low Profile Series

A more durable, higher quality hatch is simply not available. The Voyager series of hatches combines a mid profile with a patented locking tie-down assembly.

Read more
Custom Hatches<br>OEM Inquiries Only
Custom Hatches<br>OEM Inquiries Only
Custom Hatches
OEM Inquiries Only

Bomar Custom Hatch Series

From flybridge access, to hard top hatches, Bomar has the custom solutions to meet the needs and individual designs of all boat builders.

Custom Hatches are for OEM customers only.

Read more
190 Series Cast Hatch
190 Series Cast Hatch
190 Series Cast Hatch

Bomar 190 Series

Product Short Description available soon.

Read more
100 Series Cast Hatch
100 Series Cast Hatch
100 Series Cast Hatch

Bomar 100 Series

Product Short Description available soon.

Read more
Pompanette Accessories
Pompanette Accessories
Pompanette Accessories

Features: Coming Soon. Optional Features: Coming Soon.

Read more
2600 SS Mid Profile Series Hatch
2600 SS Mid Profile Series Hatch

Bomar 2600 Series

A more durable, higher quality hatch is simply not available. The Voyager series of hatches combines a mid profile with a patented locking tie-down assembly.

View our Standard 2600 Series Drawing including standard measurements.

Read more
GSB Seabreeze Shade Systems
GSB Seabreeze Shade Systems
GSB Seabreeze Shade Systems

Bomar Seabreeze Series

The SeaBreeze Shade / Screen is the perfect solution that keep the sun and insects out without ruining your elegant silhouette. It only takes minutes and a screwdriver to install the SeaBreeze, because it mounts directly to your Bomar hatch with only four screws and no additional finishing work to worry about.

Our unique built-in track system has been designed to keep the shade and screen from rolling unevenly. It always looks trim, performs with flawless precision, and can block both sun and bugs, or let in the breeze while blocking bugs. Or you can set it to do a combination of both. And of course, you can count on the quality materials and craftsmanship Bomar is known for.

Read more
NOA-003 Series Portlight
NOA-003 Series Portlight
NOA-003 Series Portlight

Bomar Direct Glaze Flush Mount Portlight

Bomar introduces the Direct Glaze Flush Mount Portlights.

This is a value-added series, of a true frameless, exterior appearance, with no mounting fasteners. It is designed using a composite base frame of stainless steel hardware to meet CE, all side area 2B, cabin side, and center consoles area 3.

While easiest to purchase as a complete window and window system, it can also be purchased as an individual component. Design criteria is based on either tempered glass or acrylic panes and lenses of which choice of color is an option as well.

We have an existing library of round, oval and rectangle shapes and sizes. Or can be designed working together with the OEM’s own parameter.

Prices vary based on total scope of the project.

View our Standard NOA-003 Drawing including standard measurements.

Read more
CRX Series Hatch
CRX Series Hatch
CRX Series Hatch

Bomar CRX Series

Available in several sizes and shapes, our CRX Series hatch features an innovative system with no screws and no visible fasteners showing on deck. Utilizing a clamp ring that is secured into its channeled extruded base, the CRX eliminates the possibility for corrosion and leaks through screw holes in the deck, because it is clamped from inside the cabin. It comes in an attractive powder coat or anodized finish, and smoke or white acrylic.

View our Standard CRX Series Drawing including standard measurements.

Read more
900 Series Molded Hatch
900 Series Molded Hatch

Bomar 900 Series

Short Description will be available soon.

View our Standard 900 Series Drawing including standard measurements.

Read more
2000 Series Hatch
2000 Series Hatch
2000 Series Hatch

Bomar High Pro Hatches

Short Description will be available soon.

View our Standard 2000 Series Drawing including standard measurements.

Read more
1000 A-Series Hatch<br>(with External A-Hinge)
1000 A-Series Hatch<br>(with External A-Hinge)
1000 A-Series Hatch
(with External A-Hinge)

Bomar Low Profile Extruded Hatch, with A-Series Top

Bomar low profile hatches are the standard for the majority of quality boat builders throughout the world. The reason? These stylish, high performance hatches combine sleek design with unsurpassed functionality.

Constructed for rugged durability, they feature a heavy-duty aluminum frame and a high-impact acrylic lens. Design features include quick-acting tie-down dogs, trim ring and screen, lockable vent position, and the option of a shade screen and/or privacy shade on some models.

Best of all, these low profile hatches are available in the largest selection of shapes and sizes of any hatch line on the market, from traditional deck hatches to larger fly bridge access doors. You can specify these hatches in a variety of finishes, including anodized, powder coated, and polished aluminum.

View our Standard 1000 Series Drawing including standard measurements.

Custom Sizes and Lens Shapes are available for orders of 50+ pieces.

Read more
Center Console Windshield<br>OEM Inquiries Only
Center Console Windshield<br>OEM Inquiries Only
Center Console Windshield
OEM Inquiries Only

American Marine Center Console Windshield

Short Product Description will be available soon.

OEM Inquiries Only.

Read more
1000 P-Series Hatch<br>(with Internal P-Hinge)
1000 P-Series Hatch<br>(with Internal P-Hinge)
1000 P-Series Hatch
(with Internal P-Hinge)

Bomar Low Profile Extruded Hatch, with P-Series Top

Bomar’s 1000 Series hatches are the standard for the majority of quality boat builders throughout the world. The reason? These stylish, high performance hatch combines a sleek design with unsurpassed functionality.

Constructed for rugged durability, they feature a heavy-duty aluminum frame and high-impact acrylic lens.

Design features include quick-acting tie-down dogs, trim ring and screen, lockable vent position, and the option of a shade screen and/or privacy shade on some models.

Best of all, these low profile hatches are available in the largest selection of shapes and sizes of any hatch line on the market, from traditional deck hatches to larger fly bridge access doors. You can specify these hatches in a variety of finishes, including anodized, powder coated, and polished aluminum.

View our Standard 1000 Series Drawing including standard measurements.

Custom Sizes and Lens Shapes are available for orders of 50+ pieces.

Read more
Bluewater Curved<br>OEM Inquiries Only
Bluewater Windshield with Vented Wing and Covered Front Glass
Bluewater Curved
OEM Inquiries Only

American Marine Bluewater Curved Windshield

The Bluewater line of curved windshields provides the boat designer the ability to create unique boat styles which are critically important in today’s marketplace. Every windshield is custom designed to fit the customer’s deck, satisfying even the most difficult requirements. Unlike standard windshields, an American Marine custom windshield will enhance and complement the styling and functionality of the boat, setting it apart from the others.

The framing system of the Bluewater curved windshield is fully welded, which provides strength and durability not found in mechanically framed windshields. This construction technique allows for the use of front opening vents or side wing vents not available in many curved windshields. Boats designed for use in temperate climates can thus have the advantage of opening vents to increase cockpit air flow.

OEM Inquiries Only.

Read more
Bluewater Conventional<br>OEM Inquiries Only
Bluewater Conventional<br>OEM Inquiries Only
Bluewater Conventional
OEM Inquiries Only

American Marine Bluewater Conventional Windshield

The Bluewater conventional welded windshield is appropriate for traditional boats requiring economical protection from wind and water. This line of custom designed windshields provides great adaptability to deck configurations which exhibit crown or camber in the side coaming. The aluminum extrusions utilized in the frames are generally heavier than most and fully welded in all corners to provide great strength and durability, which means greater value to both the boat builder and the boat owner.

The standard ¾” thick Bluewater framing system is supported by several types of headbars, sills, posts, hinges and mullions to satisfy every possible design requirement. Opening front vents, push-out side vents, handrails, and wire channels are available.

AM-Four Section Windshield

The Bluewater windshield framing system is exceptionally versatile. Some of the many designs found in use today include 3 section center console windshields with handrails, 4 section express-style windshields, 5 section windshields with center front vents, and multi-section flybridge windscreens for larger yachts. The possibilities are limited only by the designer’s imagination.

OEM Inquiries Only.

Read more
3600 Series - Marine Hatches
3600 Series Hatch
3600 Series Hatch

Bomar Flush Mount Series

The 3600 Flush Mount Hatch has been developed to accommodate the design interests of many boat manufactures seeking a “cleaner looking deck.”

Unlike traditional deck hatches, the flush mount hatch is designed to fit into a pre-tooled deck recess and is not direct replacement for traditional hatches of the same size.

Available with durable smoked grey or white acrylic lens, providing a smooth clean look.

View our Standard 3600 Series Drawing including standard measurements.

Read more
Advanced In-Boom Mainsail Reefing System
Advanced In-Boom Mainsail Reefing System
Advanced In-Boom Mainsail Reefing System

In-boom mainsail furling and reefing

Hoist and Douse your mainsail in seconds from the safety of the cockpit!

Safe, fast, and convenient. Better performance than in-mast systems. Comparable performance to conventional sails.

Available for yachts from 30′ to 60′. Over 300 Systems installed worldwide.

Read more